Categories

Viewed products

Home > Pressure>TEKPAN FİYAT LİSTESİ>Wika Models PGT23.100, PGT23.160 Bourdon tube pressure gauge with output signal
Wika Models PGT23.100, PGT23.160 Bourdon tube pressure gauge with output signal Maximize

Wika Models PGT23.100, PGT23.160 Bourdon tube pressure gauge with output signal

» Add to my wishlist

30 other products in the same category:

Models PGT23.100, PGT23.160

Bourdon tube pressure gauge with output signal

Applications

  • Acquisition and display of process values
  • Transmission of process values to the control room, 4 ... 20 mA, 0 ... 20 mA, 0 ... 10 V
  • Easy-to-read, analogue on-site display needing no external power
  • Safety-related applications

Special Features

  • "Plug and play" with no configuration necessary
  • Signal transmission per NAMUR
  • Measuring ranges 0 ... 0.6 bar to 0 ... 1600 bar
  • Easy-to-read analogue display with nominal size 100 or 160
  • Safety pressure gauge S3 per EN 837-1

Description

At any point where the process pressure has to be indicated locally, and, at the same time, a signal is wanted to be transmitted to a central controller or remote control room, the model PGT23 intelliGAUGE (patent applied for, among others European Patent No. EP 06113003) can be used.

Through the combination of a mechanical measuring system and precise electronic signal processing, the process pressure can be read securely, even if the power supply is lost.

The intelliGAUGE model PGT23 fulfils all safety-related requirements of the relevant standards and regulations for the on-site display of the operating pressure of pressure vessels. An additional measuring point for mechanical pressure indication can thus be saved.

The model PGT23 is based upon a model 23x.30 high-quality, stainless steel safety pressure gauge with a nominal size of 100 or 160. The pressure gauge is manufactured in accordance with EN 837-1.

The all welded, robust bourdon tube measuring system produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft - it is a non-contact sensor and therefore completely free from wear and friction. From this, the electrical output signal proportional to the pressure, 4 ... 20 mA, is produced.

The electronic WIKA transmitter, integrated into the high-quality mechanical pressure gauge, combines the advantages of electrical signal transmission with the advantages of a local mechanical display.

The measuring span (electrical output signal) is set automatically along with the mechanical display, i.e. the scale over the full display range corresponds to 4 ... 20 mA. The electrical zero point can also be set manually. 

Contact us

Our support hotline is available 24/7.

PhoneTel: +902244435606

Contact our expert support team!