Categories

Home > Pressure>TEKPAN FİYAT LİSTESİ>Wika Models PGT43.100, PGT43.160 Diaphragm pressure gauge with output signal
Wika Models PGT43.100, PGT43.160 Diaphragm pressure gauge with output signal Maximize

Wika Models PGT43.100, PGT43.160 Diaphragm pressure gauge with output signal

» Add to my wishlist

30 other products in the same category:

Models PGT43.100, PGT43.160

Diaphragm pressure gauge with output signal

Applications

  • Acquisition and display of process values
  • Output signals 4 ... 20 mA, 0 ... 20 mA, 0 ... 10 V for the transmission of process values to the control room
  • For measuring points with increased overload
  • Easy-to-read, analogue on-site display needing no external power
  • Safety-related applications

Special Features

  • No configuration necessary due to “plug-and-play”
  • Signal transmission per NAMUR
  • Measuring ranges from 0 ... 16 mbar
  • Easy-to-read analogue display with nominal size 100 or 160
  • Safety pressure gauge S3 per EN 837-3

Description

Wherever the process pressure has to be indicated locally and, at the same time, a signal transmission to the central control or remote centre is desired, the model PGT43 intelliGAUGE (US patent no. 8,030,990) can be used.

Through the combination of a high-quality mechanical measuring system and precise electronic signal processing, the process pressure can be read securely, even if the voltage supply is lost.
The intelliGAUGE model PGT43 fulfils all safety-related requirements of the relevant standards and regulations for the on-site display of the working pressure of pressure vessels. An additional measuring point for mechanical pressure display can thus be saved.

The model PGT43 is based upon a model 43x.30 high-quality, stainless steel safety pressure gauge with a nominal size of 100 or 160. The pressure measuring instrument is manufactured in accordance with EN 837-3.

The robust diaphragm measuring system produces a pointer rotation proportional to the pressure.
An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft – it is a non-contact sensor and therefore completely free from wear and friction. From this, the electrical output signal proportional to the pressure, e.g. 4 ... 20 mA, is produced.

The electronic WIKA sensor, integrated into the high-quality pressure gauge, combines the advantages of electrical signal transmission with the advantages of a local mechanical display.

The measuring span (electrical output signal) is adjusted automatically along with the mechanical display, i.e. the scale over the full display range corresponds to 4 ... 20 mA. The electrical zero point can also be set manually.

Contact us

Our support hotline is available 24/7.

PhoneTel: +902244435606

Contact our expert support team!